Installation ESP32

Beschreibung:

ESP32 lässt sich in vier Varianten installieren

Einmal auf dem Home Assistant selber (Vorteil, LOGS und OTA Updates und ESP32 direkt anschließen und yaml flashen)
Auf beliebigen Computer mit Linux und pip per command line (Vorteil Home Assistant unabhängig zum flashen, sonst muss ja der ESP32 an den Home Assistanten angeschlossen sein
Über die Website vom ESP32Home und dann per Terminal oder Home Assistant Erweiterung.
Dient eigentlich nur zum vorbereiten zum OTA. Denn YAML muss dann über Terminal oder Home Assistant übertragen werden.
Über die Webseite selbst nur gehostet im Container, sonst wie drei

Beispiel yaml Datei ein Beacon scanner:

Inhalt, hier in diesem Beispiel folgende sachen anpassen

den Namen, kann auch ip adresse sein für OTA Updates
das Board siehe Liste drunter
die WLAN Daten
Die mqtt Daten anpassen.
Den MQTT Topic anpassen der via mqtt gesendet wird.

esphome:
  name: ble_beacon_scanner

esp32:
  board: esp32s3box
  framework:
    type: arduino

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

mqtt:
  broker: !secret mqtt_broker
  username: !secret mqtt_user
  password: !secret mqtt_password

logger:

ota:
  platform: esphome

esp32_ble_tracker:
  on_ble_advertise:
    then:
      - mqtt.publish_json:
          topic: "ble/scantuer"
          payload: |-
            root["mac"] = x.address_str();
            root["rssi"] = x.get_rssi();
            root["name"] = x.get_name().empty() ? "unknown" : x.get_name();

Board Varianten für die Yaml Datei Abschnitt board:

Boardname in yaml Datei	Boardname	Bild
esp32s3box	YD-ESP32-23

Installation Variante 1:

Installation Variante 2:

Vorrausetzung:

Wir müssen der Dialup Gruppe zum schreiben auf USB hingefügt werden. Und schreibrechte für Jeden auf den Serial Port
Im Terminal

sudo usermod -a -G dialout <username>
Beispiel:

sudo usermod -a -G dialout duffy

via pip:

python3 -m venv esphome32
source esphome32/bin/activate
cd esphome32
pip install esphome

Inhalt aus YAML Datei oben einfügen

nano ble_beacon_scanner.yaml

Nun die Boottaste gedrückt halten, dann erst den ESP32 per USB Verbinden und Taste 5 Sekunden weiter gedrückt halten

Nun den Befehl zum flashen ausführen

sudo chmod 777 /dev/ttyACM0
esphome run ble_beacon_scanner.yaml

Ausgabe, Zum Schluss wird gefragt over the AIR oder TTY. Wir wählen 1. der name ist übrigens der Hostname für OVER the AIR wenn WLAN funktioniert, dazu muss das Gerät aber zum ersten mal via USB geflasht werden

Ausgabe

INFO ESPHome 2025.5.1
INFO Reading configuration ble_beacon_scanner.yaml...
WARNING 'ble_beacon_scanner': Using the '_' (underscore) character in the hostname is discouraged as it can cause problems with some DHCP and local name services. For more information, see https://esphome.io/guides/faq.html#why-shouldn-t-i-use-underscores-in-my-device-name
INFO Generating C++ source...
INFO Core config, version or integrations changed, cleaning build files...
INFO Compiling app...
***********************************************************************************************************************************************************************************************************************************************
If you like PlatformIO, please:
- star it on GitHub > https://github.com/platformio/platformio-core
- follow us on LinkedIn to stay up-to-date on the latest project news > https://www.linkedin.com/company/platformio/
- try PlatformIO IDE for embedded development > https://platformio.org/platformio-ide
***********************************************************************************************************************************************************************************************************************************************

Processing ble_beacon_scanner (board: esp32dev; framework: arduino; platform: platformio/espressif32@5.4.0)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Platform Manager: Installing platformio/espressif32 @ 5.4.0
INFO Installing platformio/espressif32 @ 5.4.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Platform Manager: espressif32@5.4.0 has been installed!
INFO espressif32@5.4.0 has been installed!
Tool Manager: Installing espressif/toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
INFO Installing espressif/toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: toolchain-xtensa-esp32@8.4.0+2021r2-patch5 has been installed!
INFO toolchain-xtensa-esp32@8.4.0+2021r2-patch5 has been installed!
Tool Manager: Installing platformio/framework-arduinoespressif32 @ ~3.20005.0
INFO Installing platformio/framework-arduinoespressif32 @ ~3.20005.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: framework-arduinoespressif32@3.20005.220925 has been installed!
INFO framework-arduinoespressif32@3.20005.220925 has been installed!
Tool Manager: Installing platformio/tool-esptoolpy @ ~1.40400.0
INFO Installing platformio/tool-esptoolpy @ ~1.40400.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-esptoolpy@1.40400.0 has been installed!
INFO tool-esptoolpy@1.40400.0 has been installed!
Tool Manager: Installing platformio/tool-scons @ ~4.40801.0
INFO Installing platformio/tool-scons @ ~4.40801.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-scons@4.40801.0 has been installed!
INFO tool-scons@4.40801.0 has been installed!
Library Manager: Installing bblanchon/ArduinoJson @ 6.18.5
INFO Installing bblanchon/ArduinoJson @ 6.18.5
Downloading [####################################] 100%
Unpacking [####################################] 100%
Library Manager: ArduinoJson@6.18.5 has been installed!
INFO ArduinoJson@6.18.5 has been installed!
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
- toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- WiFi @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- Update @ 2.0.0
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32/core.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32/gpio.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32/preferences.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32_ble/ble.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32_ble/ble_advertising.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32_ble/ble_uuid.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/esphome/ota/ota_esphome.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/json/json_util.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger_esp32.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger_esp8266.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger_host.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger_libretiny.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/logger_rp2040.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/logger/task_log_buffer.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/md5/md5.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_component.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_esp32.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_esp8266.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_host.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_libretiny.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mdns/mdns_rp2040.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/custom_mqtt_device.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_alarm_control_panel.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_backend_esp32.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_binary_sensor.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_button.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_client.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_climate.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_component.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_cover.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_date.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_datetime.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_event.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_fan.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_light.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_lock.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_number.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_select.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_sensor.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_switch.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_text.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_text_sensor.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_time.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_update.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/mqtt/mqtt_valve.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/network/util.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend_arduino_esp32.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend_arduino_esp8266.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend_arduino_libretiny.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend_arduino_rp2040.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/ota/ota_backend_esp_idf.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/safe_mode/safe_mode.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/socket/bsd_sockets_impl.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/socket/lwip_raw_tcp_impl.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/socket/lwip_sockets_impl.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/socket/socket.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component_esp8266.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component_libretiny.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/components/wifi/wifi_component_pico_w.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/application.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/color.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/component.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/component_iterator.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/controller.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/entity_base.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/helpers.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/log.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/ring_buffer.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/scheduler.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/string_ref.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/time.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/esphome/core/util.cpp.o
Compiling .pioenvs/ble_beacon_scanner/src/main.cpp.o
Building .pioenvs/ble_beacon_scanner/bootloader.bin
Generating partitions .pioenvs/ble_beacon_scanner/partitions.bin
Creating esp32 image...
Successfully created esp32 image.
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFi.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiAP.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiClient.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiGeneric.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiMulti.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiSTA.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiScan.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiServer.cpp.o
Compiling .pioenvs/ble_beacon_scanner/libb48/WiFi/WiFiUdp.cpp.o
Compiling .pioenvs/ble_beacon_scanner/lib001/ESPmDNS/ESPmDNS.cpp.o
Compiling .pioenvs/ble_beacon_scanner/lib315/Update/HttpsOTAUpdate.cpp.o
Compiling .pioenvs/ble_beacon_scanner/lib315/Update/Updater.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/Esp.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/FirmwareMSC.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/HWCDC.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/HardwareSerial.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/IPAddress.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/IPv6Address.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/MD5Builder.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/Print.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/Stream.cpp.o
Archiving .pioenvs/ble_beacon_scanner/libb48/libWiFi.a
Indexing .pioenvs/ble_beacon_scanner/libb48/libWiFi.a
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/StreamString.cpp.o
Archiving .pioenvs/ble_beacon_scanner/lib001/libESPmDNS.a
Indexing .pioenvs/ble_beacon_scanner/lib001/libESPmDNS.a
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/Tone.cpp.o
Archiving .pioenvs/ble_beacon_scanner/lib315/libUpdate.a
Indexing .pioenvs/ble_beacon_scanner/lib315/libUpdate.a
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/USB.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/USBCDC.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/USBMSC.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/WMath.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/WString.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/base64.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/cbuf.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-i2c-slave.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-rgb-led.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-time.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-tinyusb.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/firmware_msc_fat.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/libb64/cdecode.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/libb64/cencode.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/main.cpp.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/stdlib_noniso.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/wiring_pulse.c.o
Compiling .pioenvs/ble_beacon_scanner/FrameworkArduino/wiring_shift.c.o
Archiving .pioenvs/ble_beacon_scanner/libFrameworkArduino.a
Indexing .pioenvs/ble_beacon_scanner/libFrameworkArduino.a
Linking .pioenvs/ble_beacon_scanner/firmware.elf
RAM: [== ] 16.1% (used 52908 bytes from 327680 bytes)
Flash: [========= ] 89.4% (used 1640417 bytes from 1835008 bytes)
Building .pioenvs/ble_beacon_scanner/firmware.bin
Creating esp32 image...
Successfully created esp32 image.
esp32_create_combined_bin([".pioenvs/ble_beacon_scanner/firmware.bin"], [".pioenvs/ble_beacon_scanner/firmware.elf"])
SHA digest in image updated
Wrote 0x1a1e70 bytes to file /home/duffy/esphome32/.esphome/build/ble_beacon_scanner/.pioenvs/ble_beacon_scanner/firmware.factory.bin, ready to flash to offset 0x0
esp32_copy_ota_bin([".pioenvs/ble_beacon_scanner/firmware.bin"], [".pioenvs/ble_beacon_scanner/firmware.elf"])
======================================================================================================== [SUCCESS] Took 198.11 seconds ========================================================================================================
INFO Successfully compiled program.
Found multiple options for uploading, please choose one:
[1] /dev/ttyACM0 (Espressif Device - Espressif CDC Device)
[2] Over The Air (ble_beacon_scanner.local)
(number):

Nach wählen 1 gehts weiter

Ausgabe weiter

Hard resetting via RTS pin...
INFO Successfully uploaded program.
INFO Starting log output from /dev/ttyACM0 with baud rate 115200
[20:10:31][I][logger:171]: Log initialized
[20:10:31][C][safe_mode:079]: There have been 0 suspected unsuccessful boot attempts
[20:10:31][D][esp32.preferences:114]: Saving 1 preferences to flash...
[20:10:31][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[20:10:31][I][app:029]: Running through setup()...
[20:10:31][C][esp32_ble:031]: Setting up BLE...
[20:10:31][C][wifi:048]: Setting up WiFi...
[20:10:31][C][wifi:061]: Starting WiFi...
[20:10:31][C][wifi:062]: Local MAC: 98:88:E0:03:9C:08
[20:10:31][D][wifi:482]: Starting scan...
[20:10:31][W][component:167]: Component wifi set Warning flag: scanning for networks
[20:10:31][D][esp32_ble:288]: Enabling BLE...
[20:10:32][D][esp32_ble_tracker:295]: Starting scan, set scanner state to STARTING.
[20:10:35][D][wifi:497]: Found networks:
[20:10:35][I][wifi:541]: - 'WLAN_DRUCKER' (04:B4:FE:82:6E:C1) ▂▄▆█
[20:10:35][D][wifi:542]: Channel: 11
[20:10:35][D][wifi:543]: RSSI: -51 dB
[20:10:35][D][wifi:546]: - 'OnePlus' (CA:1D:0A:73:56:46) ▂▄▆█
[20:10:35][D][wifi:546]: - 'Hacker-Net Gast' (06:B4:FE:82:6E:C1) ▂▄▆█
[20:10:35][D][wifi:546]: - 'Vodafone-485091_EXT' (B4:0F:3B:AD:63:59) ▂▄▆█
[20:10:35][D][wifi:546]: - 'FRITZ!Box 7530 GK' (98:9B:CB:A3:7B:34) ▂▄▆█
[20:10:35][D][wifi:546]: - 'FRITZ!Box 7490' (38:10:D5:00:6B:C9) ▂▄▆█
[20:10:35][D][wifi:546]: - 'Vodafone-485091' (A0:95:7F:73:0F:A2) ▂▄▆█
[20:10:35][D][wifi:546]: - '404 Network unavailable' (E8:DF:70:4E:3C:D7) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR CCD19 2.4' (18:D6:C7:34:21:28) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR FA108' (34:2C:C4:8C:03:BA) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR Community' (36:2C:F4:8C:03:BA) ▂▄▆█
[20:10:35][D][wifi:546]: - 'MagentaWLAN-G8KR' (AC:B6:87:40:75:4E) ▂▄▆█
[20:10:35][D][wifi:546]: - 'ElmosLand' (7C:FF:4D:6A:A7:14) ▂▄▆█
[20:10:35][D][wifi:546]: - 'FRITZ!Box Gastzugang' (E2:28:6D:18:17:B5) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR CCD19 2.4' (68:02:B8:87:BA:3B) ▂▄▆█
[20:10:35][D][wifi:546]: - 'FRITZ!Box 7530 BK' (30:D3:2D:81:CC:F4) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR Community' (36:2C:F4:91:AB:30) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR DF564' (34:2C:C4:91:AB:30) ▂▄▆█
[20:10:35][D][wifi:546]: - 'ElmosLand Gastzugang' (7E:FF:4D:6A:A7:14) ▂▄▆█
[20:10:35][D][wifi:546]: - 'MagentaWLAN-L98S' (54:B7:BD:9A:BF:2E) ▂▄▆█
[20:10:35][D][wifi:546]: - 'PYUR Community' (6A:02:F8:87:BA:3B) ▂▄▆█
[20:10:35][D][wifi:546]: - 'E-T-T-B' (54:B7:BD:9A:BF:30) ▂▄▆█
[20:10:35][D][wifi:546]: - 'Ny194' (54:B7:BD:9A:BF:33) ▂▄▆█
[20:10:35][D][wifi:546]: - 'Lisa2.4' (34:2C:C4:6B:35:7B) ▂▄▆█
[20:10:39][I][wifi:313]: WiFi Connecting to 'WLAN_DRUCKER'...
[20:10:39][W][wifi:653]: Error while connecting to network.
[20:10:39][D][wifi:697]: Retrying with hidden networks...
[20:10:39][I][wifi:313]: WiFi Connecting to 'WLAN_DRUCKER'...
[20:10:40][I][wifi:617]: WiFi Connected!
[20:10:40][C][wifi:428]: Local MAC: 98:88:E0:03:9C:08
[20:10:40][C][wifi:433]: SSID: 'WLAN_DRUCKER'
[20:10:40][C][wifi:436]: IP Address: 192.168.177.85
[20:10:40][C][wifi:440]: BSSID: 04:B4:FE:82:6E:C1
[20:10:40][C][wifi:441]: Hostname: 'ble_beacon_scanner'
[20:10:40][C][wifi:443]: Signal strength: -52 dB ▂▄▆█
[20:10:40][C][wifi:447]: Channel: 11
[20:10:40][C][wifi:448]: Subnet: 255.255.255.0
[20:10:40][C][wifi:449]: Gateway: 192.168.177.1
[20:10:40][C][wifi:450]: DNS1: 192.168.177.1
[20:10:40][C][wifi:451]: DNS2: 0.0.0.0
[20:10:40][C][mqtt:037]: Setting up MQTT...
[20:10:40][D][mqtt:518]: Enabling MQTT...
[20:10:40][W][component:167]: Component mqtt set Warning flag: unspecified
[20:10:40][I][mqtt:254]: Connecting to MQTT...
[20:10:40][W][component:182]: Component wifi cleared Warning flag
[20:10:40][W][component:182]: Component mqtt cleared Warning flag
[20:10:40][I][mqtt:295]: MQTT Connected!
[20:10:41][I][app:066]: setup() finished successfully!
[20:10:41][I][app:115]: ESPHome version 2025.5.1 compiled on May 28 2025, 19:56:26
[20:10:41][C][wifi:600]: WiFi:
[20:10:41][C][wifi:428]: Local MAC: 98:88:E0:03:9C:08
[20:10:41][C][wifi:433]: SSID: 'WLAN_DRUCKER'
[20:10:41][C][wifi:436]: IP Address: 192.168.177.85
[20:10:41][C][wifi:440]: BSSID: 04:B4:FE:82:6E:C1
[20:10:41][C][wifi:441]: Hostname: 'ble_beacon_scanner'
[20:10:41][C][wifi:443]: Signal strength: -51 dB ▂▄▆█
[20:10:41][C][wifi:447]: Channel: 11
[20:10:41][C][wifi:448]: Subnet: 255.255.255.0
[20:10:41][C][wifi:449]: Gateway: 192.168.177.1
[20:10:41][C][wifi:450]: DNS1: 192.168.177.1
[20:10:41][C][wifi:451]: DNS2: 0.0.0.0
[20:10:41][C][logger:224]: Logger:
[20:10:41][C][logger:225]: Max Level: DEBUG
[20:10:41][C][logger:226]: Initial Level: DEBUG
[20:10:41][C][logger:228]: Log Baud Rate: 115200
[20:10:41][C][logger:229]: Hardware UART: USB_CDC
[20:10:41][C][logger:233]: Task Log Buffer Size: 768
[20:10:41][C][esp32_ble:411]: ESP32 BLE:
[20:10:41][C][esp32_ble:413]: MAC address: 98:88:E0:03:9C:09
[20:10:41][C][esp32_ble:414]: IO Capability: none
[20:10:41][C][esp32_ble_tracker:733]: BLE Tracker:
[20:10:41][C][esp32_ble_tracker:734]: Scan Duration: 300 s
[20:10:41][C][esp32_ble_tracker:735]: Scan Interval: 320.0 ms
[20:10:41][C][esp32_ble_tracker:736]: Scan Window: 30.0 ms
[20:10:41][C][esp32_ble_tracker:737]: Scan Type: ACTIVE
[20:10:41][C][esp32_ble_tracker:738]: Continuous Scanning: YES
[20:10:41][C][esp32_ble_tracker:747]: Scanner State: RUNNING
[20:10:41][C][esp32_ble_tracker:760]: Connecting: 0, discovered: 0, searching: 0, disconnecting: 0
[20:10:41][C][mdns:120]: mDNS:
[20:10:42][C][mdns:121]: Hostname: ble_beacon_scanner
[20:10:42][W][wifi:163]: WiFi Connection lost... Reconnecting...
[20:10:42][I][wifi:313]: WiFi Connecting to 'WLAN_DRUCKER'...
[20:10:42][E][mqtt.idf:162]: MQTT_EVENT_ERROR
[20:10:42][E][mqtt.idf:164]: Last error code reported from esp-tls: 0x0
[20:10:42][E][mqtt.idf:165]: Last tls stack error number: 0x0
[20:10:42][E][mqtt.idf:167]: Last captured errno : 113 (Software caused connection abort)
[20:10:42][C][esphome.ota:073]: Over-The-Air updates:
[20:10:42][C][esphome.ota:074]: Address: ble_beacon_scanner.local:3232
[20:10:42][C][esphome.ota:075]: Version: 2
[20:10:42][W][component:167]: Component wifi set Warning flag: associating to network
[20:10:42][W][mqtt:344]: MQTT Disconnected: WiFi disconnected.
[20:10:42][C][safe_mode:018]: Safe Mode:
[20:10:42][C][safe_mode:020]: Boot considered successful after 60 seconds
[20:10:42][C][safe_mode:021]: Invoke after 10 boot attempts
[20:10:42][C][safe_mode:023]: Remain in safe mode for 300 seconds
[20:10:42][C][mqtt:152]: MQTT:
[20:10:42][C][mqtt:154]: Server Address: 192.168.177.20:1883 (192.168.177.20)
[20:10:42][C][mqtt:155]: Username: 'mqtt'
[20:10:42][C][mqtt:156]: Client ID: 'ble_beacon_scanner-9888e0039c08'
[20:10:42][C][mqtt:157]: Clean Session: NO
[20:10:42][C][mqtt:159]: Discovery IP enabled
[20:10:42][C][mqtt:162]: Discovery prefix: 'homeassistant'
[20:10:42][C][mqtt:163]: Discovery retain: YES
[20:10:42][C][mqtt:165]: Topic Prefix: 'ble_beacon_scanner'
[20:10:42][C][mqtt:167]: Log Topic: 'ble_beacon_scanner/debug'
[20:10:42][C][mqtt:170]: Availability: 'ble_beacon_scanner/status'
[20:10:43][I][wifi:617]: WiFi Connected!
[20:10:43][C][wifi:428]: Local MAC: 98:88:E0:03:9C:08
[20:10:43][C][wifi:433]: SSID: 'WLAN_DRUCKER'
[20:10:43][C][wifi:436]: IP Address: 192.168.177.85
[20:10:43][C][wifi:440]: BSSID: 04:B4:FE:82:6E:C1
[20:10:43][C][wifi:441]: Hostname: 'ble_beacon_scanner'
[20:10:43][C][wifi:443]: Signal strength: -43 dB ▂▄▆█
[20:10:43][C][wifi:447]: Channel: 11
[20:10:43][C][wifi:448]: Subnet: 255.255.255.0
[20:10:43][C][wifi:449]: Gateway: 192.168.177.1
[20:10:43][C][wifi:450]: DNS1: 192.168.177.1
[20:10:43][C][wifi:451]: DNS2: 0.0.0.0
[20:10:43][W][component:182]: Component wifi cleared Warning flag
[20:10:45][W][component:167]: Component mqtt set Warning flag: unspecified
[20:10:45][I][mqtt:254]: Connecting to MQTT...
[20:10:57][W][component:182]: Component mqtt cleared Warning flag
[20:10:57][I][mqtt:295]: MQTT Connected!
[20:10:58][W][component:257]: Component mqtt took a long time for an operation (108 ms).
[20:10:58][W][component:258]: Components should block for at most 30 ms.
[20:11:31][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[20:11:31][D][esp32.preferences:114]: Saving 1 preferences to flash...
[20:11:31][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed

Nun kann das Gerät, getrennt werden.
Fertig

Installationsvariante 3:

in Google Chrome öffnen, Firefox geht nicht.

https://web.esphome.io

Im Boot modus den ESP32 Verbinden mit dem Computer.
Die Boot taste gedrückt halten, dann den ESP32 Verbinden und 2 Sekunden warten dann die Boot Taste los lassen.
Klick auf ESPHome
In einem terminal schreibrechte auf den USB Port geben

sudo chmod 777 /dev/ttyACM0

Nun auf Connect klicken

Wenn zum ersten mal benutzt, dann Prepare first use anklicken.
Ist der ESP32 schon geflasht kann per terminal oder Homeassistant die neue yaml aufgespielt werden.
Dann ist das hier überflüssig, und bei Abschnitt via Terminal weitermachen

Grundsystem installiert. Nun kann Wifi Konfiguriert werden

Netzwerk auswählen

Kennwort eingeben, connect anklicken

warten

Nun kann nochmals WLAN geändert, oder geschlossen werden.
Über visit Device bekommt man ne Weboberfläche, wo man aber nicht viel machen kannen.

Visit device, damit man es mal gesehen hat, denn da landen die Nachrichten drin

yaml Datei aufspielen:

Via Terminal:

Der gleiche Befehl wie bei USB direkt nur das wir hier 2 für ota wählen. Und der Name in der yaml Datei muss der Hosstname sein.
IP-Adressen gehen nicht. Wenn der Hostname nicht bekannt ist, über die Fritzbox zum beispiel ermitteln

Der Befehl:

esphome run ble_beacon_scanner.yaml

Bei der Frage für LOG wählen wir auch 2

Ausgabe OTA

esphome run ble_beacon_scanner.yaml
INFO ESPHome 2025.5.1
INFO Reading configuration ble_beacon_scanner.yaml...
INFO Generating C++ source...
INFO Core config, version or integrations changed, cleaning build files...
INFO Compiling app...
Processing esphome-web-039c08 (board: esp32s3box; framework: arduino; platform: platformio/espressif32@5.4.0)
-----------------------------------------------------------------------------------------------------------------------
Library Manager: Installing bblanchon/ArduinoJson @ 6.18.5
INFO Installing bblanchon/ArduinoJson @ 6.18.5
Unpacking [####################################] 100%
Library Manager: ArduinoJson@6.18.5 has been installed!
INFO ArduinoJson@6.18.5 has been installed!
HARDWARE: ESP32S3 240MHz, 320KB RAM, 16MB Flash
- toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
- toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- WiFi @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- Update @ 2.0.0
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32/core.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32/gpio.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32/preferences.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32_ble/ble.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32_ble/ble_advertising.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32_ble/ble_uuid.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/esphome/ota/ota_esphome.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/json/json_util.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger_esp32.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger_esp8266.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger_host.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger_libretiny.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/logger_rp2040.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/logger/task_log_buffer.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/md5/md5.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_component.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_esp32.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_esp8266.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_host.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_libretiny.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mdns/mdns_rp2040.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/custom_mqtt_device.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_alarm_control_panel.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_backend_esp32.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_binary_sensor.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_button.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_client.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_climate.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_component.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_cover.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_date.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_datetime.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_event.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_fan.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_light.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_lock.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_number.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_select.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_sensor.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_switch.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_text.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_text_sensor.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_time.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_update.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/mqtt/mqtt_valve.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/network/util.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend_arduino_esp32.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend_arduino_esp8266.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend_arduino_libretiny.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend_arduino_rp2040.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/ota/ota_backend_esp_idf.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/safe_mode/safe_mode.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/socket/bsd_sockets_impl.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/socket/lwip_raw_tcp_impl.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/socket/lwip_sockets_impl.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/socket/socket.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component_esp8266.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component_libretiny.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/components/wifi/wifi_component_pico_w.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/application.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/color.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/component.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/component_iterator.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/controller.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/entity_base.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/helpers.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/log.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/ring_buffer.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/scheduler.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/string_ref.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/time.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/esphome/core/util.cpp.o
Compiling .pioenvs/esphome-web-039c08/src/main.cpp.o
Building .pioenvs/esphome-web-039c08/bootloader.bin
Generating partitions .pioenvs/esphome-web-039c08/partitions.bin
Creating esp32s3 image...
Successfully created esp32s3 image.
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFi.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiAP.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiClient.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiGeneric.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiMulti.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiSTA.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiScan.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiServer.cpp.o
Compiling .pioenvs/esphome-web-039c08/libb48/WiFi/WiFiUdp.cpp.o
Compiling .pioenvs/esphome-web-039c08/lib001/ESPmDNS/ESPmDNS.cpp.o
Compiling .pioenvs/esphome-web-039c08/lib315/Update/HttpsOTAUpdate.cpp.o
Compiling .pioenvs/esphome-web-039c08/lib315/Update/Updater.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/Esp.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/FirmwareMSC.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/HWCDC.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/HardwareSerial.cpp.o
Archiving .pioenvs/esphome-web-039c08/libb48/libWiFi.a
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/IPAddress.cpp.o
Indexing .pioenvs/esphome-web-039c08/libb48/libWiFi.a
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/IPv6Address.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/MD5Builder.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/Print.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/Stream.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/StreamString.cpp.o
Archiving .pioenvs/esphome-web-039c08/lib001/libESPmDNS.a
Indexing .pioenvs/esphome-web-039c08/lib001/libESPmDNS.a
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/Tone.cpp.o
Archiving .pioenvs/esphome-web-039c08/lib315/libUpdate.a
Indexing .pioenvs/esphome-web-039c08/lib315/libUpdate.a
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/USB.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/USBCDC.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/USBMSC.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/WMath.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/WString.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/base64.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/cbuf.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-i2c-slave.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-rgb-led.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-time.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-tinyusb.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/firmware_msc_fat.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/libb64/cdecode.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/libb64/cencode.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/main.cpp.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/stdlib_noniso.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/wiring_pulse.c.o
Compiling .pioenvs/esphome-web-039c08/FrameworkArduino/wiring_shift.c.o
Archiving .pioenvs/esphome-web-039c08/libFrameworkArduino.a
Indexing .pioenvs/esphome-web-039c08/libFrameworkArduino.a
Linking .pioenvs/esphome-web-039c08/firmware.elf
RAM: [== ] 18.4% (used 60188 bytes from 327680 bytes)
Flash: [======== ] 76.1% (used 1396017 bytes from 1835008 bytes)
Building .pioenvs/esphome-web-039c08/firmware.bin
Creating esp32s3 image...
Successfully created esp32s3 image.
esp32_create_combined_bin([".pioenvs/esphome-web-039c08/firmware.bin"], [".pioenvs/esphome-web-039c08/firmware.elf"])
SHA digest in image updated
Wrote 0x164eb0 bytes to file /home/duffy/esphome32/.esphome/build/esphome-web-039c08/.pioenvs/esphome-web-039c08/firmware.factory.bin, ready to flash to offset 0x0
esp32_copy_ota_bin([".pioenvs/esphome-web-039c08/firmware.bin"], [".pioenvs/esphome-web-039c08/firmware.elf"])
============================================ [SUCCESS] Took 30.29 seconds ============================================
INFO Successfully compiled program.
Found multiple options for uploading, please choose one:
[1] /dev/ttyACM0 (USB JTAG/serial debug unit)
[2] Over The Air (esphome-web-039c08.local)
(number): 2
INFO Resolving IP address of esphome-web-039c08.local in mDNS
INFO Connecting to 192.168.177.85 port 3232...
INFO Connected to 192.168.177.85
INFO Uploading /home/duffy/esphome32/.esphome/build/esphome-web-039c08/.pioenvs/esphome-web-039c08/firmware.bin (1396400 bytes)
Uploading: [============================================================] 100% Done...

INFO Upload took 26.21 seconds, waiting for result...
INFO OTA successful
INFO Successfully uploaded program.
Found multiple options for logging, please choose one:
[1] /dev/ttyACM0 (USB JTAG/serial debug unit)
[2] MQTT (192.168.177.20)
(number):

Ausgabe 2

(number): 2
INFO Starting log output from esphome-web-039c08/debug
INFO Connected to MQTT broker!
[01:42:15][D][esp32_ble_tracker:295]: Starting scan, set scanner state to STARTING.

Der Wert esphome-web-039c08/debug ist der Topic fürs log
Im Terminal mit strg+c kann das Prgramm beendet werden, denn der ESP32 ist fertig

via Home Assistant